Daily maintenance method of rotor balancing machine

With the application of microcomputer technology, the balancing machine has been brought into a new era, and the balancing machine has been significantly improved in terms of performance, accuracy and operability. And it is more and more widely used in power tools, machinery manufacturing, fans, motors, papermaking, textiles, household appliances, metallurgy and other fields. The dynamic balancing machine is also the same as other mechanical products. If the daily maintenance cannot be done well, the loss will be accelerated and the service life will be shortened. Therefore, in order to save more costs, we must pay attention to the maintenance of the dynamic balancing machine. The balancing machine is an instrument used to measure the unbalance of the rotor, and it is corrected according to the measurement results to improve the mass distribution of the balanced rotor, so that the vibration of the journal or the force acting on the bearing is reduced to a specified range when the rotor is running.​​
The balancing machine is an instrument used to measure the unbalance of the rotor, and it is corrected according to the measurement results to improve the mass distribution of the balanced rotor, so that the vibration of the journal or the force acting on the bearing is reduced to a specified range when the rotor is running. For the daily maintenance of the car, the role of the balancing machine cannot be ignored. How much do you know about the balancing machine?
1. It is necessary to scrub the balancer frequently, keep the balancer clean, the guide rail surface should be kept clean, and often oiled to prevent rust;
2. The surface of the support block or roller should be cleaned continuously, and iron filings, dust and debris should not be adhered to. Before each operation, the support block or roller and rotor journal should be wiped clean, and a small amount of lubricating oil should be added;
3. When moving the support frame, the rotor should be transformed together or the left and right support frames should be moved together at the same speed to avoid scratches and wear on the surface of the journal and the roller. It is not allowed to place the rotor on the roller frame for hitting or hitting; 4. Winter Because the temperature is low, it is normal for the computer system to occasionally start slowly under zero degrees, and it does not affect the normal use of the balancer. Two-station automatic balancing machine
To keep the balancer clean from time to time, the guide rail surface should be kept clean and oiled to prevent rust from time to time. The surface of the support block or the roller should be kept clean, and no iron filings, dust and debris are allowed to adhere to it. Before each work, the support block or the roller and the rotor journal should be cleaned and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed at the same time to avoid scratches and wear on the surface of the journal and the roller.
The lens glass of the photoelectric head of the dynamic balancing machine should always be wiped off the outer surface of the lens with lens paper or lens cloth to keep it clean. Never use a greasy yarn end or a dirty cloth to wipe the mirror surface. The balancing machine is a sophisticated testing equipment, and there should be a special person responsible for keeping and operating it. So what work should be done in the process of using the balancing machine to make the service life of the balancing machine longer. The following is a detailed popularization of Shanghai Shenman.
1. Keep the surface of the support connection part clean, carefully check the waist before work, refuel, and keep well lubricated during work.
2. All parts of the swing frame have been adjusted before leaving the factory, and do not disassemble at will during use.
  3. Add an appropriate amount of No. 30 engine oil to the lubricating place before each shift, and each butter should be cleaned and changed once a year under one shift.
4. The locking mechanism should be able to reliably lock the swing frame. When loosening, it should completely leave the swinging part. The swing frame should only be released during measurement, and should be locked during the rest of the time. The wheel frame should not be moved when locked.
5. The parts to be balanced should not be placed on the rack during non-working hours for a long time.
6. The electrical box should be kept clean to prevent moisture.
7. When the machine is found to be abnormal during use and cannot be handled, the power supply should be cut off in time and the maintenance team should be notified.